Continuous Hinges

This section contains the sizes and numbers of continuous hinges which are considered standard and are usually carried in stock in 72" and 84" lengths. These are surface type blank hinges without holes and less finish. They have pins of similar material flush with the ends of the hinge leaves.
Other gauges, widths, lengths, and pin materials can be made to order.
Prices based on quantity of order are available upon request.
NO MINIMUM quantity required, any order acceptable.

Click on the following to go to the hinge material of your choice:
Steel
Stainless Steel
Aluminum
Brass



Steel

Plain Surface Type

Hinge leaf material -- Cold Rolled Steel
Hinge pin material -- Steel

Note: All dimensions in inches

 
Number Gauge Width Length Pin Diameter Joint Size
1225-A .020 3/4 72 .067 1/4
1624-A .025 1 72 .062 1/4
1220-A .036 3/4 72 .086 1/4
1720-A .036 1-1/16 72 .086 1/4
2020-A .036 1-1/4 72 .086 1/4
2420-A .036 1-1/4 72 .086 1/4
1619-A .040 1 72 .080 1/4
1719-A .040 1-1/16 72 .080 1/4
1719-G .040 1-1/16 72 .093 1/2
1719-B .040 1-1/16 72 .093 1/4
2019-A .040 1-1/4 72 .080 1/4
2019-G .040 1-1/4 72 .093 1/2
2019-B .040 1-1/4 72 .093 5/8
2419-A .040 1-1/2 72 .080 1/4
2419-G .040 1-1/2 72 .093 1/2
2419-B .040 1-1/2 72 .093 5/8
2819-A .040 1-3/4 72 .080 1/4
2819-G .040 1-3/4 72 .093 1/2
3219-A .040 2 72 .080 1/4
3219-G .040 2 72 .093 1/2
1618-G .048 1 72 .125 1/2
1618-B .048 1 72 .125 1/2
2018-G .048 1-1/4 72 .125 1/2
2018-B .048 1-1/4 72 .125 5/8
2418-G .048 1-1/2 72 .125 1/2
2418-B .048 1-1/2 72 .125 5/8
2418-B7 .048 1-1/2 84 .125 5/8
2418-G .048 1-3/4 72 .125 1/2
2818-B .048 1-3/4 72 .125 5/8
2818-B .048 1-3/4 72 .125 1/2
3218-G .048 2 72 .125 1/2
3218-B .048 2 72 .125 5/8
3218-B7 .048 2 84 .125 5/8
4018-G .048 2-1/2 72 .125 1/2
4018-B .048 2-1/2 72 .125 5/8
4818-B .048 3 72 .125 5/8
4818-B7 .048 3 84 .125 5/8
5618-B7 .048 3-1/2 84 .125 5/8
6418-B .048 4 72 .125 5/8
1616-G .060 1 72 .125 1/2
1616-B .060 1 72 .125 5/8
1616-C .060 1 72 .125 3/4
2016-G .060 1-1/4 72 .125 1/2
2016-C .060 1-1/4 72 .125 3/4
2416-G .060 1-1/2 72 .125 1/2
2416-B .060 1-1/2 72 .125 5/8
2416-D .060 1-1/2 72 .125 1
2416-B7 .060 1-1/2 72 .125 5/8
2816-D .060 1-3/4 72 .125 1
3216-G .060 2 72 .125 1/2
3216-B .060 2 72 .125 5/8
3216-E .060 2 72 .187 2
3216-E7 .060 2 84 .187 2
4016-G .060 2-1/2 72 .125 1/2
4016-B .060 2-1/2 72 .125 5/8
4016-B7 .060 2-1/2 84 .187 5/8
4016-E .060 2-1/2 72 .250 2

These hinges may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths, and pin materials available to order.


STEEL

Plain Surface Type
 

Hinge leaf material -- Cold Rolled Steel
Hinge pin material -- Steel
Gauges -- .187 -- .375 -- H.R.P.O. Steel

Number Gauge Width Length Pin Diameter Joint Size
4816-B .060 3 72 .125 5/8
4816-D7 .060 3 84 .187 1
4816-E .060 3 72 .250 2
4816-E7 .060 3 84 .250 2
5616-D7 .060 3-1/2 84 .187 1
6416-E7 .060 4 84 .250 2
2414-E .075 1-1/2 72 .187 2
3214-E .075 2 72 .250 2
4014-E .075 2-1/2 72 .250 2
4014-E7 .075 2-1/2 84 .250 2
4814-E .075 3 72 .250 2
4814-E7 .075 3 84 .250 2
5614-E .075 3-1/2 84 .250 2
5614-E7 .075 3-1/2 84 .250 2
6414-E .075 4 72 .250 2
6414-E7 .075 4 84 .250 2
8014-E7 .075 5 84 .250 2
2413-E .090 1-1/2 72 .250 2
3213-E .090 2 72 .312 2
3213-E7 .090 2 84 .250 2
4013-E .090 2-1/2 72 .250 2
4013-E7 .090 2-1/2 84 .250 2
4813-E .090 3 72 .250 2
5613-E .090 3-1/2 72 .250 2
6413-E .090 4 72 .312 2
8013-E .090 5 84 .375 2
8013-E7 .090 5 84 .375 2
3212-E .105 2 72 .250 2
4012-E7 .105 2-1/2 84 .312 2
4812-E7 .105 3 84 .375 2
3211-E .120 2 72 .250 2
3211-E7 .120 2 84 .250 2
4011-E .120 2-1/2 72 .312 2
4011-E7 .120 2-1/2 84 .312 2
4811-E .120 3 72 .375 2
4811-E7 .120 3 84 .375 2
5611-E .120 3-1/2 72 .375 2
5611-E7 .120 3-1/2 84 .375 2
6411-E .120 4 72 .375 2
6411-E7 .120 4 84 .375 2
8011-E .120 5 72 .500 2
9611-E .120 6 72 .500 2
8011-E7 .120 5 84 .500 2
3210-E7 .135 2 84 .312 2
4810-E7 .135 3 84 .375 2
6410-E7 .135 4 84 .500 2
4807-E .187 3 72 .500 2
4807-E7 .187 3 84 .500 2
6407-E .187 4 72 .500 2
6407-E7 .187 4 84 .500 2
8007-E .187 5 72 .500 2
8007-E7 .187 5 84 .500 2
481Q-F .250 3 72 .625 1-1/2
641Q-F .250 4 72 .625 1-1/2
801Q-F .250 5 72 .625 1-1/2
6438-E .375 4 72 .625 2
8038-E .375 5 72 .625 2
9638-E .375 6 72 .625 2

These hinges may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths, and pin materials available to order.



STAINLESS STEEL
 
Plain Suface Type

Hinge leaf material -- Type 304--2B
Hinge pin material -- Type 303/304 Cold Finish

Number Gauge Width Open Length Pin Dia. Joint Size
S-1225-A .025 3/4 72 .062 1/4
S-1620-A .037 1 72 .091 1/4
S-1720-G .037 1-1/16 72 .093 1/2
S-1720-B .037 1-1/16 72 .093 5/8
S-2020-A .037 1-1/4 72 .091 1/4
S-2420-A .037 1-1/2 72 .091 1/4
S-2420-B .037 1-1/2 72 .093 5/8
S-2820-G .037 1-3/4 72 .093 1/2
S-1719-B .040 1-1/16 72 .093 5/8
S-2019-B .040 1-1/4 72 .093 5/8
S-2419-B .040 1-1/2 72 .093 5/8
S-3219-B .040 2 72 .093 5/8
S-1618-B .048 1 72 .125 5/8
S-2018-B .048 1-1/4 72 .125 5/8
S-2418-B .048 1-1/2 72 .125 5/8
S-2818-B .048 1-3/4 72 .125 5/8
S-3218-B .048 2 72 .125 5/8
S-4018-B .048 2-1/2 72 .125 5/8
S-4818-B .048 3 72 .125 5/8
S-1616-B .060 1 72 .125 5/8
S-2016-B .060 1-1/4 72 .125 5/8
S-2416-B .060 1-1/2 72 .125 5/8
S-2816-B .060 1-3/4 72 .125 5/8
S-3216-B .060 2 72 .125 5/8
S-3216-E .060 2 72 .187 2
S-3216-B3 .060 2 72 .187 5/8
S-4016-B .060 2-1/2 72 .125 5/8
S-4816-D .060 3 72 .187 1
S-6416-E .060 4 72 .250 2
S-3214-E .075 2 72 .250 2
S-4014-E .075 2-1/2 72 .250 2
S-4814-E .075 3 72 .250 2
S-6414-E .075 4 72 .250 2
S-4013-E .090 2-1/2 72 .250 2
S-4813-E .090 3 72 .250 2
S-6413-E .090 4 72 .250 2
S-3211-E .120 2 72 .250 2
S-4011-E .120 2-1/2 72 .250 2
S-4811-E .120 3 72 .250 2
S-6411-E .120 4 72 .250 2
S-8011-E .120 5 72 .375 2
S-9611-E .120 6 72 .375 2
S-4807-E .187 3 72 .500 2
S-6407-E .187 4 72 .500 2
S-8007-E .187 5 72 .500 2
S-481Q-E .250 3 72 .625 2
S-641Q-E .250 4 72 .625 2
S-801Q-E .250 5 72 .625 2

These hinges may be modified by swaging, forming, hole piercing and other services.
Other gauges, widths, lengths, and pin materials available to order.


ALUMINUM
 
Plain Surface Type

Hinge leaf material -- #5052-H-34
Hinge pin material -- #2017-T4
 

Number Gauge Width Open Length Pin Dia. Joint Size
A-1222-A .025 3/4 72 .062 1/4
A-1622-A .025 1 72 .062 1/4
A-1718-A .040 1-1/16 72 .092 1/4
A-1718-B .040 1-1/16 72 .092 5/8
A-2018-A .040 1-1/4 72 .092 1/4
A-2418-A .040 1-1/2 72 .092 1/4
A-2418-G .040 1-1/2 72 .092 1/2
A-2416-B .051 1-1/2 72 .125 5/8
A-2816-B .051 1-3/4 72 .125 5/8
A-3216-B .051 2 72 .125 5/8
A-3216-G .051 2 72 .125 1/2
A-4016-B .051 2-1/2 72 .125 5/8
A-4816-B .051 3 72 .125 5/8
A-1614-B .063 1 72 .125 5/8
A-2014-B .063 1-1/4 72 .125 5/8
A-2414-B .063 1-1/2 72 .125 5/8
A-2814-B .063 1-3/4 72 .125 5/8
A-3214-G .063 2 72 .125 1/2
A-3214-B .063 2 72 .187 5/8
A-4014-E .063 2-1/2 72 .250 2
A-4814-E .063 3 72 .250 2
A-3212-E .081 2 72 .250 2
A-4012-E .081 2-1/2 72 .250 2
A-4812-E .081 3 72 .250 2
A-5612-E .081 3-1/2 72 .250 2
A-4811-E .091 3 72 .250 2
A-6411-E .091 4 72 .250 2
A-328-E .125 2 72 .250 2
A-488-E .125 3 72 .250 2
A-648-E .125 4 72 .250 2

These hinges may be modified by swaging, forming, hole piercing and othe services.
Other gauges, widths, lengths, and pin materials available to order.


BRASS

Plain Surface Type

Hinge leaf material -- Half Hard Brass
Hinge pin material -- SAE-72 Brass
 
Number Gauge Width Open Length Pin Dia. Joint Size
B-1719-G .036 1-1/16 72 .093 1/2
B-2018-G .040 1-1/4 72 .093 1/2
B-2418-G .040 1-1/2 72 .093 1/2
B-3218-G .040 2 72 .093 1/2
B-1616-G .051 1 72 .125 1/2
B-2016-G .051 1-1/4 72 .125 1/2
B-2416-G .051 1-1/2 72 .125 5/8
B-2816-B .051 1-3/4 72 .125 5/8
B-3216-B .051 2 72 .125 5/8
B-4016-B .051 2-1/2 72 .125 5/8
B-4816-B .051 3 72 .125 5/8
B-1614-G .064 1 72 .125 1/2
B-2014-B .064 1-1/4 72 .125 5/8
B-2414-B .064 1-1/2 72 .125 5/8
B-2814-B .064 1-3/4 72 .125 5/8
B-3214-B .064 2 72 .187 5/8
B-4014-E .064 2-1/2 72 .187 2
B-4814-E .064 3 72 .250 2
B-3212-E .081 2 72 .250 2
B-4012-E .081 2-1/2 72 .250 2
B-4812-E .081 3 72 .250 2
B-5612-E .081 3-1/2 72 .250 2
B-3211-E .091 2 72 .250 2
B-4811-E .091 3 72 .250 2
B-6411-E .091 4 72 .250 2
B-328-E .125 2 72 .250 2
B-488-E .125 3 72 .250 2
B-648-E .125 4 72 .250 2

These hinges may be modified by swaging, forming, hole piercing and othe services.
Other gauges, widths, lengths, and pin materials available to order.



Return to Home Page

Go to Butt Hinges Page

Go to Spring Hinges Page

Go to Loose Hinges Page

Go to Order Form



Braun Manufacturing Co., Inc.
Established 1925
1350 Feehanville Drive
Mount Prospect, Illinois 60056
tel: (847) 635-2050
fax: (847) 635-7655
E-mail Braun sales@hinge1.com